Description
Found languishing in the dark recesses of the old signals store room, Primare MM30 plug-in streaming module for Pre 32 or I32 amplifiers.
RRP was £1250
1 cONNect AN iPOd, iPhONe, Or iPAd
You can connect an iPod, iPhone, iPad, or other UPnP device to the Media Module, to allow you to play music from the device through the PRE32/I32:
- Turn the SELECTOR until the Media source is selected:
- Connect iPod, iPhone, iPad, or other UPnP device to the USB A port using the cable supplied with the device.
The PRE32/I32 display will show:
Media iPod
You can now browse the music on your device, and control playback, using the Primare App; for more information see Using the Primare App, page 6.
You need another iPhone, iPod or iPad to browse the music which is on the USB-A connected iPhone, iPod or iPad.
It is also possible to play the music from your iPod, iPhone or iPad over Wifi using the Primare App.
2 cONNect tO A cOMPuter
You can connect the Media Module to a Windows PC or Macintosh USB input to allow you to use the PRE32/I32 as a digital audio output device.
On a PC,Windows XP/SP2 or later is required. On a Macintosh, OSX 10.4 or later is recommended.
• Connect the computer’s USB port to the USB B input on the Media Module using a USB A to USB B cable.
The first time that the Media Module is plugged in to the PC or Macintosh it will automatically be recognised, and appropriate drivers will be installed.
The Media Module will then appear as a sound output device called XMOS USB Audio 2.0 in the Sound control panel (PC) or Sound system preferences panel (Macintosh).
• Turn the SELECTOR until the USB source is selected:
USB
Note: For best results set the computer volume control to its maximum value, and use the PRE32/ I32 volume control to adjust the playback volume.
3 cONNect iNPuts
You can connect up to three digital optical inputs and one digital coax input to the Media Module to allow you to play digital sources through your PRE32/I32.
Digital optical inputs
• Connect the optical inputs 1 to 3 to digital sources with optical outputs, using TOSlink optical cables.
• Turn the SELECTOR until the appropriate source is selected; for example:
4 cONNect tO the iNterNet
You can connect the Media Module to the Internet via either Wi-Fi or a standard Ethernet cable, to allow you to stream audio to the PRE32/ I32, or listen to Internet radio stations.
See Setting up the network settings, page 4, for information about configuring the network settings.
Digital coax input
• •
Connect the digital coax input 4 to a digital source with a coax output using a digital coax cable.
